Firebird Flight Manual
  • Firebird Flight Manual
  • Record of Manual Revisions
    • Revision A
  • Introduction
  • General Information and System Description
    • Aircraft
      • Airframe
      • Flight Control Surfaces
      • Propulsion, propellers, and rotors
      • Avionics
    • Control Station
      • Hardware, buttons and joysticks
      • User interface overview
      • Vehicle status indicator
      • Vehicle overview menu
      • Flight mode selector
      • Connection manager
      • Quick actions sidebar
      • Vehicle dashboard
      • Flight Map
      • Camera View
    • Command and Control
    • Launch and/or recovery equipment
      • Parachute
    • Ground operational area set up
  • Performance and Limitations
    • Battery Specifications
  • Normal Procedures
    • Pre-flight planning
      • Mission planning
        • Area Survey
        • Corridor Scan
        • Structure Scan
    • System Assembly
    • Pre-flight Inspection Check
    • System Starting and Takeoff
    • In-flight monitoring
    • Cruise / Maneuvering in flight
    • Payload Operation
    • Landing
    • System Shutdown
    • Post-flight inspection
  • Emergency Procedures
  • Weight and balance, and equipment list
  • Handling, servicing, preventative and field maintenance and instructions for continued airworthiness
    • Ground Handling
    • Disassembly, storage and reassembly
    • Battery Handling
    • Cleaning and care
    • Owner/Operator Responsibilities
    • Authorized field-level or preventative maintenance
    • Return to service procedures
  • Supplements
    • Payloads Operation
    • Continued Airworthiness
      • Notices of Corrective Action
    • External References
Powered by GitBook
On this page
  1. Handling, servicing, preventative and field maintenance and instructions for continued airworthiness

Return to service procedures

6.2.1 After scheduled (excluding preflight and postflight) maintenance, repairs, or alterations are performed on any major component(s) of the lightweight UAS, the lightweight UAS can only be returned to service by a person authorized by the manufacturer, CAA, or through an otherwise-accepted program.

6.2.2 The lightweight UAS shall be returned to service by an entry in the component’s logbook that includes the date, description of work performed, and signature of the authorized person.

PreviousAuthorized field-level or preventative maintenanceNextSupplements

Last updated 5 months ago