Firebird Flight Manual
  • Firebird Flight Manual
  • Record of Manual Revisions
    • Revision A
  • Introduction
  • General Information and System Description
    • Aircraft
      • Airframe
      • Flight Control Surfaces
      • Propulsion, propellers, and rotors
      • Avionics
    • Control Station
      • Hardware, buttons and joysticks
      • User interface overview
      • Vehicle status indicator
      • Vehicle overview menu
      • Flight mode selector
      • Connection manager
      • Quick actions sidebar
      • Vehicle dashboard
      • Flight Map
      • Camera View
    • Command and Control
    • Launch and/or recovery equipment
      • Parachute
    • Ground operational area set up
  • Performance and Limitations
    • Battery Specifications
  • Normal Procedures
    • Pre-flight planning
      • Mission planning
        • Area Survey
        • Corridor Scan
        • Structure Scan
    • System Assembly
    • Pre-flight Inspection Check
    • System Starting and Takeoff
    • In-flight monitoring
    • Cruise / Maneuvering in flight
    • Payload Operation
    • Landing
    • System Shutdown
    • Post-flight inspection
  • Emergency Procedures
  • Weight and balance, and equipment list
  • Handling, servicing, preventative and field maintenance and instructions for continued airworthiness
    • Ground Handling
    • Disassembly, storage and reassembly
    • Battery Handling
    • Cleaning and care
    • Owner/Operator Responsibilities
    • Authorized field-level or preventative maintenance
    • Return to service procedures
  • Supplements
    • Payloads Operation
    • Continued Airworthiness
      • Notices of Corrective Action
    • External References
Powered by GitBook
On this page
  • Hardware Interface
  • Screen Interface and Displays
  • Fly View
  • Plan View
  1. General Information and System Description

Control Station

Information on the control station and control station software

PreviousAvionicsNextHardware, buttons and joysticks

Last updated 5 months ago

Hardware Interface

The control station used is the Herelink Ground Control Station, which runs Auterion Mission Control (AMC).

Screen Interface and Displays

Auterion Mission control is installed on the control station and can also be installed on a computer, which is recommended for planning missions.

Fly View

Fly View is used to monitor and control vehicle flight. It is the default view displayed upon Auterion Mission Control application start.

Plan View

Mission planning
Firebird Control Station