Firebird Flight Manual
  • Firebird Flight Manual
  • Record of Manual Revisions
    • Revision A
  • Introduction
  • General Information and System Description
    • Aircraft
      • Airframe
      • Flight Control Surfaces
      • Propulsion, propellers, and rotors
      • Avionics
    • Control Station
      • Hardware, buttons and joysticks
      • User interface overview
      • Vehicle status indicator
      • Vehicle overview menu
      • Flight mode selector
      • Connection manager
      • Quick actions sidebar
      • Vehicle dashboard
      • Flight Map
      • Camera View
    • Command and Control
    • Launch and/or recovery equipment
      • Parachute
    • Ground operational area set up
  • Performance and Limitations
    • Battery Specifications
  • Normal Procedures
    • Pre-flight planning
      • Mission planning
        • Area Survey
        • Corridor Scan
        • Structure Scan
    • System Assembly
    • Pre-flight Inspection Check
    • System Starting and Takeoff
    • In-flight monitoring
    • Cruise / Maneuvering in flight
    • Payload Operation
    • Landing
    • System Shutdown
    • Post-flight inspection
  • Emergency Procedures
  • Weight and balance, and equipment list
  • Handling, servicing, preventative and field maintenance and instructions for continued airworthiness
    • Ground Handling
    • Disassembly, storage and reassembly
    • Battery Handling
    • Cleaning and care
    • Owner/Operator Responsibilities
    • Authorized field-level or preventative maintenance
    • Return to service procedures
  • Supplements
    • Payloads Operation
    • Continued Airworthiness
      • Notices of Corrective Action
    • External References
Powered by GitBook
On this page
  1. General Information and System Description
  2. Control Station

Vehicle overview menu

Vehicle overview menu description

PreviousVehicle status indicatorNextFlight mode selector

Last updated 7 months ago

The quick vehicle menu provides operators with an easy way to access the pre-flight checks, vehicle overview with critical notifications, safety settings, cloud features, and other functionalities. The Active Task sub-page also offers insights into Skynode's onboard computer running tasks. This provides valuable visibility during operations. For example, users can monitor the synchronization status of their imagery to the Auterion Suite.

Vehicle Overview page

  • Notifications: provides in-flight information for pilots. A more detailed log is uploaded to Auterion Suite for analysis.

  • Sensors: sensor calibration and status

  • Remote ID: Remote ID status information

  • Connectivity: LTE and Wifi status information

  • Active tasks: active tasks running on the Skynode flight computer

Preflight checklist

The Pre-Flight Checklist should be run before every flight to verify that the vehicle and planned flight path are safe to fly.

Safety

Under the safety menu, you can set up your safety settings.

The manufacturer is not liable and does not recommend changing the default fail-safe settings.

Cloud Page

Configure the Auterion Suite settings under the Cloud tab. The Cloud tab is only available in the quick vehicle menu if you have an internet connection. The vehicle cloud functionality is turned on by default.

More

You can find all the information about your software version and GPS Denied capabilities.

Configure the GPS Denied Advanced Settings (available for Fixed-Wing and VTOL vehicle types)

Section 1: Enable GPS Denied Navigation Support

  • Display the vehicle's raw GPS location and accuracy on the map.

  • Enable toggling GPS fusion on/off from the GPS Status popup.

  • Manually reset the vehicle's position from the “Position Reset” menu in the Tool Strip.

  • Allow takeoff without requiring a GPS lock.

Section 2: Enable Home Position Setting

  • Manually set the vehicle's Home Position by clicking the “H” icon on the map or using the “Position Reset” menu in the Tool Strip.

About

Here you can find the information about your software version.