Pre-flight planning
Last updated
Last updated
Users of the Firebird drone must comply with all applicable airspace and radio frequency (RF) regulations established by the country of operation. It is the operator’s responsibility to obtain the necessary permissions, ensure proper RF spectrum usage if necessary, and adhere to local aviation laws, including no-fly zones and altitude restrictions. Failure to follow these regulations may cause interference with other aircraft or communications and is the responsibility of the operator.
Locate RSSI Information:
Look for the specific metric labeled RSSI or Signal Strength in the telemetry data list. In AMC, RSSI is often displayed as a percentage or dBm value, which indicates the strength and quality of the signal.
RSSI may also be represented visually on the AMC dashboard, such as with bar indicators or color-coded signals (green for strong, yellow for moderate, and red for weak signal strength).
Interpret RSSI Data:
A higher RSSI percentage or dBm value (e.g., closer to 100% or between -30 and -60 dBm) indicates a strong signal, whereas lower percentages or dBm values (e.g., below -90 dBm) suggest a weaker connection.
Keep an eye on the RSSI data throughout the flight to ensure a consistent, reliable connection, especially in areas with potential interference or obstacles.
The Firebird™ does not require any specific equipment to be launched or recovered. However, despite not recommend, the user may utilize any optional equipment for their convenience.